Our Contact Centre will be closed starting September 9th at 1 PM to September 10th. You will still have access to Online Services during this time, or you can reach us at contact@technicalsafetybc.ca. Please report incidents and hazards at 1 866 566 7233.
Our Contact Centre will be closed starting September 9th at 1 PM to September 10th. You will still have access to Online Services during this time, or you can reach us at contact@technicalsafetybc.ca. Please report incidents and hazards at 1 866 566 7233.
Incident and Hazard Reporting - Boilers, Pressure Vessels, Piping and Fittings
Information Bulletin
Information Bulletin: Incident and Hazard Reporting - Boilers, Pressure Vessels, Piping and Fittings
April 28, 2017
Reference Number:
IB-BP 2017-01
Revision Number:
Rev 1
A. General Details
This Information Bulletin is being issued to clarify incident reporting requirements. It is issued with respect to sections 36 and 37 of the Safety Standards Act, section 34 of the Safety Standards General Regulation and section 66 of the Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation.
How to Report Incidents and Hazards to Technical Safety BC
For emergency assistance call 911 or your local police or fire department directly.
Incidents and hazards are to be reported to Technical Safety BC through our website at /report-incident/incident-reporting-form or go to our website at www.technicalsafetybc.ca and select “I Want to Report an Incident/Hazard”. Alternatively, you can call 1 866 566 7233 and follow the prompts to report an incident or hazard.
Note: voicemail and email messages made to Technical Safety BC employees concerning incidents and hazards are not considered to have been reported to Technical Safety BC as required by regulation.
Definitions
Incident: A failure of a regulated product, work or operation that causes:
a) damage to property, personal injury or death
b) damage to safety features
Note:
- Property damage or injury focuses on the impact that the failed equipment may have had outside the boundaries of the product, work or operation.
- Damage to safety features relates to failures where the damage:
- is limited to the failed product, work or operation and
- does not render the product or activity inoperative and
- impairs the safety feature’s effectiveness.
Safety feature: An aspect of a product’s design, installation, maintenance or operation that is intended to prevent people or property from being exposed to a hazard.
Hazard: A source of potential harm to persons or potential damage to property.
Duty holder: A person or company who is responsible for compliance because they either own regulated products, or perform regulated work.
Reporting of Incidents to Technical Safety BC
The following duty holders are required to report all incidents to Technical Safety BC:
- Person in charge of a regulated product or regulated work
- Owner of the regulated product
- Permit holder
- Person authorized to perform or performing regulated work
- Person authorized to operate or operating a regulated product
- An officer or employee of a utility
- Owner of a plant (as defined in the regulations)
Only one incident report per incident is required.
Duty to Preserve Incident Site for Investigation
A person must not remove, disturb or interfere with anything in, on or about the place where the incident occurred except as necessary to rescue a person, prevent injury or to protect property unless directed by a safety officer or safety manager.
Reporting of Hazards to Technical Safety BC
Hazards are required to be prevented or immediately corrected by duty holders that are responsible for the regulated product, work or operation. Hazards must be immediately reported to Technical Safety BC when:
- it is not known that the hazard is being corrected by the duty holder or
- the same or similar hazards have been repeatedly observed and are associated with the same duty holder.
When to Report Incidents and Hazards to Technical Safety BC
For emergency assistance call 911 or your local police or fire department directly.
Incidents
Unless otherwise indicated, all incidents are to be reported within the following timeframes:
- Incidents resulting in a moderate, major or fatal injury – immediately.
- Incidents resulting in moderate, major or severe damage – immediately.
- All other incidents – within 24 hours (or as soon as practicable).
Moderate injuries are those that, while serious, are considered unlikely have a significant effect to long-term quality of life. Examples include single limb fractures, concussions, disorientation.
Moderate damage is damage that results with controlled exposure to energy (ie. electrical, thermal, mechanical) or the limited/controlled release of substances intended to be contained.
Hazards
All hazards as described in the ‘reporting of hazards’ section above are to be reported to Technical Safety BC immediately.
What to Expect After Reporting an Incident or Hazard to Technical Safety BC
Technical Safety BC tracks and investigates incidents and hazards that are reported to inform awareness and prevention initiatives. Consequently, Technical Safety BC does not investigate all reported incidents and may not follow-up with a notification unless there is an intention to investigate.
Summaries of all reported incidents and completed investigations can be accessed via Technical Safety BC at incident investigations. Technical Safety BC protects the identity of persons who report or may be involved with incidents or hazards.
Unless otherwise indicated, duty holders are required to preserve the equipment, products and items involved in an incident. Technical Safety BC will contact duty holders within 24 hours of the next regular business day following the report of an incident if more information is required or an investigation is planned to occur.
B. Examples of Boiler, Pressure Vessel, Pressure Piping Incidents and Hazards
BPV incidents that are required to be reported:
- Tube leaks within a recovery boiler combustion chamber.
- Pressure boundary failures (including the activation of pressure relief devices) that discharge hazardous contents into an occupied space or the environment.
- Weld failure.
- Material failure.
- Seal failure.
Note: Hazardous substances are those that if released
- and a person came into contact, the person would likely sustain an injury.
- and not contained, would likely damage the natural environment.
- Inoperative pressure relief devices discovered outside of planned maintenance
- Malfunctioning safety controls discovered outside of planned maintenance
BPV occurrences that are not reportable incidents (to Technical Safety BC)
- Piping leak of hot water outside of a combustion chamber
- Leak of non-hazardous substances at a seal or connection
- Defects discovered as part of planned maintenance
- Damage/leaks acceptable to a maintenance program or plan
- Occurrences involving equipment that is not subject to the Safety Standards Act
- Vessels that are vented to atmosphere or
- Vessels that are operating at pressures less than 15psi and protected by a pressure relief devices set at or below 15psi
Examples of BPV hazards that should be reported to Technical Safety BC
- Unrepairable or unserviceable equipment that is in use or available for use
- Pressure retaining components damaged or corroded beyond (or suspected of) design limits
- Regulated BPV work being completed by:
- unlicenced businesses (includes expired licences) or
- work being performed outside of the scope of licence
- e.g., A class A contractor may install high-temperature/high pressure thermal fluid heaters, but a class Au contractor may not.
- persons not qualified for the work (includespersons without BC certificates of qualification)
- Unpermitted work or operations
Tony Scholl
Jeff Coleman, P.Eng.
Provincial Safety Manager
Provincial Safety Manager
Boiler, Pressure Vessels, Pressure Piping
Incident Investigations
References:
Safety Standards Act
Electrical Safety Regulation
Elevating Devices Safety Regulation
Gas Safety Regulation
Power Engineers, Boiler, Pressure Vessel & Refrigeration Safety Regulation
Safety Standards General Regulation